Vector Laboratories is closed for the President’s Day on Monday, February 19th. We will be back in the office on Tuesday, February 20th.
We will respond to emails upon our return. Have a wonderful day.
VECTASHIELD PLUS protects against fading across the visible spectrum, even under far-red wavelengths. It is compatible with most commercially available fluorophores. This new formulation of non-setting media improves upon the original VECTASHIELD products. Specifically, VECTASHIELD PLUS exhibits no inherent background or toning and provides superior fluorophore signal retention across the spectrum, including far-red wavelengths.
| Unit Size | 2 ml, 10 ml |
|---|---|
| Applications | Immunofluorescence, In situ hybridization |
| Recommended Storage | 2-8 ºC |
| Mounting | Aqueous (Non-Hardening) |
| Antifade | Yes |
| Counterstain | None |
VECTASHIELD PLUS provides several advantages over the regular VECTASHIELD (H-1000 & H-1200). In particular, VECTASHIELD PLUS media have significantly lower inherent background toning and provide superior signal retention particularly in the far-red spectrum (e.g. Cy5).
Similar to other non-setting media, we recommend you to seal the coverslip perimeter if the intention is to store the slides for a period of time.
Yes, the antifade mounting media are at least equivalent in signal retention. We have not seen any reduction in performance with any fluorophores evaluated, and with some dyes (i.e. Alexa Fluor 647 and Dylight 649) there are advantages.
We do know that regular VECTASHIELD antifade mounting media (H-1000 & H-1200) are suitable for SRM. However, the formulation for VECTASHIELD PLUS is different from that used for regular VECTASHIELD. Indeed one component of H-1000 and H-1200 that may have been a contributing factor to the underlying blue tone and that appears to play a key role in optimal signal for SRM, has been removed from VECTASHIELD PLUS. Therefore, until we have data to the contrary VECTASHIELD PLUS would not be recommended for SRM.
The refractive index for VECTASHIELD Mounting Medium is 1.45.
VECTASHIELD PLUS Mounting Medium does not solidify, but rather, remains a liquid on the slide—which can then be stored without sealing. If desired, coverslips can be sealed around the perimeter using nail polish or plastic sealant. Mounted slides should be stored at 2-8 °C and protected from light.
Other manufacturers measure the antifade properties of their mountants using labeled microspheres or arrayed spots. Vector Labs prefers to measure antifade properties of VECTASHIELD mountants using frozen tissue sections that have been immunohistochemically stained with fluorescently labeled secondary antibodies. Antifade capability is then measured using a 40x objective with real time imaging over 30 seconds of continuous exposure to the excitation illumination. Individual intensity measurements are recorded from 6 separate labeled regions and the average is calculated. The intensity after 30 second exposure is expressed as a percentage of the intensity at zero time. The values for PG are taken from the manufacturer’s published results.
Correctly coverslipping your slides ensures that your tissue specimens are preserved for optimal imaging and viewing. In this blog post, we will walk you through how to properly coverslip your slides to protect your samples.
As far as antifade mounting media go, one-size-fits-all solutions are few and far between. Here, we break down key factors you should consider when choosing the best antifade mounting medium for your experiment.
You’ve got lots of options when it comes to choosing a mounting media. Let us help you decide whether setting or non-setting mounting media will work best for your workflow in this Tips & Tricks article.
Applicable patents and legal notices are available at legal notices.
Stay in the Loop. Join Our Online Community
Together we breakthroughTM
©Vector Laboratories, Inc. 2024 All Rights Reserved.
How do I Request a Quote?
To request a quote for products: