HRP–Antibody All-in-One™ Conjugation Kit

A-9002
SKU Unit Size Price Qty
A-9002-001 1 Kit
$530.00

To request a quote for products:

  1. Click “Contact Us” in the header bar above;
  2. Click “Customer Service”;
  3. Complete the form and provide the following information in the “Comments” section: note you would like a quote, item number (SKU) and quantity;
  4. Click “Submit”.

Description

The HRP-Antibody All-in-One Conjugation Kit contains everything needed to make two HRP-Antibody conjugates from 100 µg of any user-supplied antibody. Included in the kit are purification columns to remove un-conjugated HRP and antibody, which produces conjugates with superior levels of detection and low non-specific binding.

Specifications

More Information
Conjugation Targets Antibody
Label/Modifier Type HRP
Reactivity Amine
Recommended Storage 4°C
Applications Antibody Labeling, Antisense/RNAi, Aptamers, Immunotherapeutics, In Situ Proximity Ligation, In vitro Diagnostic (IVD), Laboratory Developed Tests (LDT), Analyte Specific Reagents (ASR)

Kit Components

  • S-HyNic (2 x 100 μg)
  • 4FB-HRP (2 x 50 μl)
  • 1X Modification Buffer (10 mL)
  • Q Binding Buffer A (5 mL)
  • Q Elution Buffer A (1.6 mL)
  • Red Cap Spin Column (2)
  • Yellow Cap Spin Column A (2)
  • Brown Cap Spin Column A (2)
  • Blue Cap Spin Column A (2)
  • Q Spin Column (2)
  • Q Collection Tubes (4)
  • Anhydrous DMF (1.5 mL)
  • 30K MWCO Vivaspin Filter (2)
  • 2 mL Collection Tube (16)

Documents

Technical Information

A. Product Description

Each HRP‐Antibody All‐in‐OneT Conjugation Kit provides all the necessary components to generate two (2) highly purified antibody‐HRP conjugates. The kit requires the user to provide 100 μg of starting antibody for each conjugate. The components of this unique kit feature a pre‐activated, high‐activity horseradish peroxidase (>250U/mg) as well as a novel Q spin filter to purify the conjugate in high yield. Conjugates produced are free of both residual antibody and HRP, thus providing maximum signal to noise in your assay. Any suitably purified monoclonal or polyclonal mammalian antibody (regardless of IgG subclass) can be conjugated and purified within 5 hours (~1 h hands‐on).

All‐in‐One conjugation kits are based on SoluLINK’s proven HydraLINK chemistry. This chemistry involves the reaction of an aromatic hydrazine with an aromatic aldehyde to form a stable hydrazone bond. HydraLINK conjugation is so efficient that it converts 100% of the antibody to the conjugate form. This linking efficiency is made possible because of the recent discovery that small quantities of aniline catalyze hydrazone bond formation between the two functional groups (1, 2, 3). Aniline increases both the rate and efficiency of conjugate formation under mild reaction conditions; leading to quantitative conversion of free antibody to HRP conjugate.

Complete conversion of antibody to conjugate greatly simplifies downstream purification. Purification consists of selectively binding the conjugate to a novel Q spin filter membrane that allows excess HRP to flow through unbound. The spin filter provides high purity without sacrificing conjugate yield. Conjugates made with All‐in‐One kit are compatible with all downstream applications such as Westerns, ELISAs, or IHC. Each kit provides sufficient reagents to perform two (2) conjugation reactions; each yielding between 50‐70 μg of high purity HRP‐antibody conjugate.

B. All‐in‐One Technology

Conjugation Chemistry

HydraLINK chemistry is based on the use of two complementary heterobifunctional linkers; S‐HyNic and Sulfo‐S‐4FB (Figure 1). S‐HyNic (Succinimidyl‐6‐hydrazino‐ nicotinamide) is first used to modify and incorporate protected aromatic hydrazines (HyNic groups) into the antibody via acylation of lysine residues. In a similar fashion a second linker, Sulfo‐S‐4FB (Sulfo‐N‐succinimidyl‐4‐formylbenzamide) is used by SoluLINK to provide a pre‐activated high activity HRP called 4FB‐HRP (included). Incubation of HyNic‐modified antibody with pre‐activated 4FB‐HRP in the presence of aniline catalyst leads to rapid and efficient conversion of the antibody to conjugate through formation of stable bis‐arylhydrazone bonds (Figure 2).

Figure 1. Structure of S‐HyNic and Sulfo‐S‐4FB linkers used for conjugating HRP to antibody.

Figure 2. Aniline catalyzed conjugation of HyNic‐modified antibody with pre‐activated 4FB‐HRP.

Conjugate Purification

The efficiency of aniline‐catalyzed hydrazone bond formation greatly simplifies conjugate purification. Aniline’s ability to increase both the rate and efficiency of conjugate formation under mild reaction conditions leads to quantitative conversion of free antibody to conjugate. The complete absence of free antibody at the end of the catalyzed reaction leaves only two components; excess HRP and conjugate. After conjugation, a novel Q spin filter is used to selectively bind the conjugate based on known biophysical properties of IgG (4, 5) while allowing free HRP to flow through. Purified conjugate can then be eluted from the filter membrane free of both residual antibody and HRP in high yield (50‐70 μg).

Figure 3. Q spin filter purification of HRP‐IgG conjugate.

C. All‐in‐One Conjugation Process Summary

 

Figure 4. HRP‐Antibody All‐in‐One conjugation process.

Intellectual Property

SoluLINK Bioconjugation For Research Use Only. Not for use in diagnostic procedures. For additional licensing restrictions, please see the license agreement at vectorlabs.com/solulink-research-license.

Products are for research use only, not for use in diagnostic or therapeutic procedures or for use in humans. Products are not for resale without express written permission of Seller. No license under any patent or other intellectual property right of Seller or its licensors is granted or implied by the purchase unless otherwise provided in writing.

TriLink does not warrant that the use or sale of the products delivered hereunder will not infringe the claims of any United States or other patents or patents pending covering the use of the product alone or in combination with other products or in the operation of any process. All and any use of TriLink product is the purchaser's sole responsibility.